My status
Sales & Supports: 86-755-26786281
Email us sales1@kimpok.com
TRUSTED GlOBAL SECURITY SOLUTIONS SINCE 1998
Home > 1.2GHz wireless Tx&Rx > 1.2GHz 10W Transmitter and Receiver KP-A10
1.2GHz 10W Transmitter and Receiver KP-A10
1.2GHz 10W Transmitter and Receiver

Professional FPV, UAV transmitter, receiver, 1.2GHz, 10W 4CHs.
Wireless AV transmitter & receiver kit.
Digital play, 4CHs transmitter, credibility, synchronic, transmitting AV signal, use for long-distance of wireless transmitting equipments.
Large output frequency, equipped fan in it, credibility, use for long distance wireless transmit projects and special use in military project.

 


 

Specification  

 Working Voltage: DC 12V
 Output Frequency: 0.9G/1.2G/1.3G
 Channel: 4CHS, Video and Audio Synchronization
 Frequency band: 1080GHz, 1120GHz, 1160GHz, 1200GHz
 Output Power: 10W
 Weight: 3168g
 Diemsion(L*W*H): 304*104*97mm
 Transmit Distance (Open/unobstructed space): 10 ~ 30KM

Package 
 Transmitter
 12 channel Receiver
 Antenna
 Video cable and transmitter connecting cable
 Power adapters for transmitter and receiver
 
 

Application:
If you are seeking an equipment that can transmit the audio and video to a long distance without cable, for example the villa, small lake, bridge or some other open areas, this transmitter system is the right one you need

This equipment will cover a long distance in the open area around 30Km

But when there are obstacle between the transmitter and receiver, it will be decided case by case

This  unit is the professional one and the signal is very strong in 1.2G series that can be used to cover the long distance where need strong signal and the industrial  project.

 

Installing:
A. The line has 5 plugs for connecting transmitter, camera and power supply
One of the line's points connecting to transmitter, another has 4 plugs (red, yellow, white, black)
Red plug connect DC 12V/1000mA, can also connect battery
White and yellow plug connect to camera's audio and video apart
And black one connects camera's power input jack

B. Push the control button, can change the channel of receiver
Meanwhile, push it and last several seconds, can close the digital play and turn into saving power model
Then push it again, can replay
The function can be able to lock channel, so as to avoid mistaking operation

C. Set the same channel with transmitter and receiver